Dr Marco Actis-Grande (Politecnico di Torino, Italy)
Dr Paula Alvaredo Madrid (University Carlos III, Spain)
Dipl-Ing Olaf Andersen (Fraunhofer IFAM Germany)
Dr Volker Arnhold (Powder Metallurgy Solutions, Germany)
Prof Sundar Atre (Oregon State University, USA)
Dipl.-Ing. Claus Aumund Kopp (Fraunhofer - IFAM, Germany)
Prof Thierry Barriere (Uiversity of Franche-Comte, France)
Dr Frank Baumgaertner (Schunk Sintermetalltechnik GmbH, Germany)
Prof Paul Beiss (RWTH Aachen IWM, Germany)
Mr Sigurd Berg (Höganäs AB, Sweden)
Dr Pierre Blanchard (Erasteel Kloster, Sweden)
Dr Ravi Bollina Mahindra (Ecole Centrale, India)
Miss Cecelia Borgonovo (Hoeganaes Corporation, USA)
Dr Animesh Bose (Desktop Metal, Inc., USA)
Prof Didier Bouvard (INP Grenoble, France)
Dr Martin Bram (Forschungszentrum Juelich GmbH, Germany)
Mr Georg Breitenmoser (Parmaco Metal Injection Molding, Switzerland)
Prof Christoph Broeckmann (RWTH Aachen IWM, Germany)
Dr Carlo Burkhardt (OBE Ohnmacht and Baumgaertner, Germany)
Prof Mónica Campos (Madrid University Carlos III, Spain)
Mr Ralf Carlström (Höganäs AB, Sweden)
Prof Efraín Carreño-Morelli (University of Applied Sciences Western Switzerland, Switzerland)
Prof Francisco Castro (CEIT, Spain)
Dr Ilaria Cristofolini (Trento University, Italy)
Prof Herbert Danninger (Vienna University of Technology, Germany)
Dr Susan Davies (Bodycote, United Kingdom)
Dr Raquel De Oro (Calderon TU Wien, Austria)
Dr Magdalena Dlapka (Miba Sinter Austria GmbH, Austria)
Dr Klaus Dollmeier (GKN Sinter Metals Service GmbH, Germany)
Mr Mark Dougan (AMES SA, Spain)
Dr Thomas Ebel (Helmholtz-Zentrum Geesthacht, Germany)
Mr Ulf Engström (Höganäs AB, Sweden)
Dr Eberhard Ernst (GKN Sinter Metals Engineering GmbH, Germany)
Dr Zak Fang (University of Utah, USA)
Mr Andreas Fölzer (Bohler Edelstahl GmbH & Co KG, Austria)
Mr Philippe François (Rio Tinto GmbH, Germany)
Dr Karin Frisk (Swerea KIMAB, Sweden)
Dr Luz Fuentes (Pacheco PMG Polmetasa SAU, Spain)
Dr José García (Sandvik Coromant AB, Sweden)
Dr Christian Gierl-Mayer (Vienna University of Technology, Austria)
Dr Elena Gordo (Madrid University Carlos III, Spain)
Dr Gemma Herranz (Castilla La Mancha University, Spain)
Dipl.-Ing. Johannes Heyde (Schunk Sintermetalltechnik GmbH, Germany)
Dr Johan Hjärne (Quintus Technologies AB, Sweden)
Dr Eduard Hryha (Chalmers University of Technology, Sweden)
Dr Edmond Ilia (Metaldyne Sintered Components, USA)
Dr Iñigo Iturriza (CEIT, Spain)
Prof Seong Jin Park (POSTECH, Korea, Democratic People's Republic of)
Dr Anke Kaletsch (RWTH Aachen IWM, Germany)
Prof Jan Kazior (Cracow University of Technology, Poland)
Prof Bernd Kieback (Fraunhofer IFAM, Germany)
Dr Alexander Kirchner (Fraunhofer IFAM, Germany)
Mr Peter Kjeldsteen (Sintex, Denmark)
Dipl.-Ing. Lutz Lackner (Dorst Technologies, Germany)
Mrs Caroline Larsson (Höganäs AB, Sweden)
Mr Anssi Laukkanen (VTT Technical Research Centre, Finland)
Mr Christoph Laumen (Linde Gas, Germany)
Dr Sabine Lay (INP Grenoble, France)
Prof-Dr Jai-sung Lee (Hanyang University, Korea, Democratic People's Republic of)
Prof Walter Lenaguer (Vienna University of Technology, Austria)
Dr Bruce Lindsley (Hoeganaes Corporation, USA)
Dipl.-Ing. Marko Maetzig (ARBURG GmbH, Germany)
Dr Bernhard Mais (ECKA Granules GmbH, Germany)
Dr José Manuel Martin (CEIT, Spain)
Mr Michael Marucci (Hoeganes Corporation, USA)
Dr Stephen Mashl (Michigan Technical University, USA)
Mr Pelle Mellin (Swerea KIMAB, Sweden)
Prof Luis Miguel-Llanes (Catalunya Universitat Politecnica, Spain)
Dr Jean-Michel Missiaen (INP Grenoble, France)
Prof Alberto Molinari (University of Trento, Italy)
Dr Siavash Momeni (Hilti, Liechtenstein)
Dipl.-Ing. Marco Mulser (Fraunhofer IFAM, Germany)
Mr Keith Murray (Sandvik Osprey Ltd., United Kingdom)
Dr Erich Neubauer (RHP Technology GmbH, Austria)
Dr Salvator Nigarura (PMG Indiana Corporation, USA)
Prof Susanne Norgren (Sandvik AB, Sweden)
Prof Lars Nyborg (Chalmers University of Technology, Sweden)
Prof Radu Orban (Cluj Napoca technical University, Romania)
Dr Vladimir Paserin (Rio Tinto Metal Powders, Canada)
Dr Carsten Peters (Hilti, Liechtenstein)
Dr Tadeusz Pieczonka (Cracow University, Poland)
Dr Volker Piotter (Karlsruhe institute of Technology GmbH, Germany)
Dr Yoko Pittini-Yamada (Meyer Sintermetall AG, Switzerland)
Dipl.-Ing. Johannes Pötschke (Fraunhofer IKTS, Germany)
Dr Leo Prakash (Kyocera Unimerco, Germany)
Prof Florian Pyczak (Helmholtz-Zentrum Geesthacht, Germany)
Dr Ilaria Rampin (Pometon Spa, Italy)
Dipl.-Ing. Walter Rau (Dorst Technologies, Germany)
Mrs Adeline Riou (Erasteel SAS, France)
Dr José Manuel Sanchez Moreno (CEIT, Spain)
Dr Andreas Schoppa (PMG Fussen GmbH, Germany)
Dr James Sears (GE Global Research, USA)
Mr Peter Sokolowski (Hoeganaes Corporation, USA)
Mr Gerold Stetina (Miba Sinter Austria GmbH, Austria)
Dr Rajiv Tandon (Magnesium Elektron Powders, USA)
Dr Marc Thomas (Onera, France)
Dr Sophia Tsipas (Madrid University Carlos III, Spain)
Dr Ralph Useldinger (Ceratizit S.A, Luxembourg)
Dr Henk Van den Berg (Kennametal Shared Services GmbH, Germany)
Prof Maurizio Vedani (Milano Politecnico, Italy)
Mr Peter Vervoort (Eisenmann Thermal Solutions GmbH,Germany)
Dr Bruno Vicenzi (Mimitalia srl, Italy)
Dr Thomas Weissgaerber (Fraunhofer IFAM, Germany)
Dr Lars Wimbert (GKN Sinter Metals Service GmbH, Germany)
Dr Takeda Yoshinobu (Hoganas Japan, Japan)
Dr Matteo Zanon (Pometon Spa, Italy)
Dr Andreas Zeller (GKN Sinter Metals Service GmbH, Germany)

Go To Top